To create favorable conditions for the use, operation and maintenance of semi-trailers brand: ASEAN manufactured and assembled by Asean Mechanical Technology Corporation.  We compiled this warranty, through key safety specifications and things to keep in mind during operation and use.  We hope that customers will carefully study the Company's recommendations for use and periodically check and maintain the component parts of semi-trailers.  To continuously improve the economic efficiency and technical safety of semi-trailers.

Cases not covered by warranty or paid repairs:

 •Damage caused by customers arbitrarily changing the structure and location of product details.

 •Damage due to use not following instructions or for the wrong purpose.

 •Overloading in design, improper loading of goods.

 •Damages caused by traffic accidents, natural disasters, and floods.

 •Damaged parts due to natural wear and tear during use (rubber, seals, bearings, batteries, tires, paint...)

 Customers note:

 •Re-tighten spring bolts, clamp bolts, and tie arm bolts after using 2-3 trips or 300km, every 6 months (tighten bolts while under load).

 •03 months/ time to bring SMRM to the workshop for periodic inspection.

 •Check SMRM after every trip over 1,000 km

 •Regularly check tire pressure, maintain it at 7.5 kg/cm2 or higher.

 •Drain water from the compressed air tank.

 •Clean the air filter of the steam splitter at the inlet and outlet ports, once a month.

 •Regularly pay attention to the air connection point between the tractor and trailer.  There may be an obstruction causing the brakes to lock.  Close the air connection (air handle) when not in use.

 •Do not arbitrarily add grease to the shaft.  The time limit for adding grease is when replacing brake pads or running every 150,000km or every 6 months.  The recommended grease to use is Shell Retinax LX2, Mobil HP223 or Mobil HP222.

 •For vehicles with lifting axles, the air pressure in the air tank displayed at the meter is 6kg.  Do not arbitrarily change this value.


REGULATIONS ON WARRANTY DETAILS AND WARRANTY PERIOD

No.

WARRANTY CONTENTS

WARRANTY PERIOD

1

Chassi

24  months

2

King pin

12  months

3

Axle

12 months

4

Landing gear

12 months

5

Suspension

12 months

6

Wheel

12 months

7

Tire

According to the manufacturer's regulations, attached

8

Bearing

12 months

9

Connector, miscellanious

12 months

10

Air chamber

12 months

11

Brake chamber

12 months

12

Air valve

12 months

13

Electricity

12 months

14

Lamp

06 months

15

Rubber tube, balance

06 months

16

Air suspension

06 months

17

Hydraulic dump system for Self-Dumping semi trailer

12 months

18

Hydraulic dump system for lowbeb semi trailer

06 months